用欢喜岭油田低凝稠油生产AH-90重交通道路沥青

针对欢喜岭油田低微稠油的特点，采用常压蒸馏—氧化沥青联合装五的工艺流程，生产出AH-90重交通道路沥青。经测试表明，各项性能均达到我国现行重主通道路沥青技术指标。在高温稳定性、低温抗裂性等方面都优于新加坡壳牌沥青。是一种优质的道路沥青。     

丽音（NICAM）双伴音／立体声电视广播技术

本文首先介绍了电视双伴音/立体声广播的几种常用方式,然后着重分析丽音(NICAM)双伴音/立体声广播系统的基本原理,并给出其接收系统的集成电路。     

BYJ型防喷脱接器的设计与应用

本文介绍了BYJ型防喷脱接器的结构和工作原理。它既有抽油杆与大泵活塞脱接功能,又能实现不压井作业施工,是大型抽油泵理想的配套工具。现场应用表明,该防喷脱接器对接成功率较高,并实现了大泵井不压井施工。     

翻领成型器领口曲线的程序计算展开法

根据翻领成型器领口曲线的数学模型，介绍一种利用计算器复杂公式存贮的特殊功能，预编程序计算相关参数。然后画领口曲线展开图的方法。     

Microscopic fatigue processes in a plain-weave glass-fibre composite

This paper focuses on the microscopic damage and progressive failure of a composite reinforced by plain-weave glass cloth under tensile fatigue loading. The fatigue process was divided into three stages like that of multi-directional laminates. It was found that the internal damage at each stage (matrix cracks, debonds in the weft, successive debonds in the warp and ‘metadelaminations’ between warps and wefts) occurred near the cross-over point of the fabric. The modulus decay mechanism was explained by considering the progression of this internal damage. From the end of the first stage to the beginning of the middle stage, a characteristic damage state (CDS) (called a ‘meta-CDS’) was observed. It was found that woven composites have a unit area of damage accumulation (called a ‘unit cell’) and the damage of each unit cell and its distribution control the total fatigue damage of the material.     

沈阳太平洋广场空调冷热源方案比较

对一幢１１．５万ｍ＾２的四星级综合建筑的空调冷热源不同的蓄冷和取冷比较了四种方案，论证了其中直燃型溴化锂吸收式冷热水机组供冷供暖、小型燃油锅炉供蒸汽的方案最为合理。     

多媒体通信的新发展

本文介绍了各种多媒体通信终端的新标准,对于开发PSTN 多媒体可视电话终端,提出了有关建议,分析了适用于多媒体通信的各种通信网络,最后论述了多媒体通信中的两项关键技术,即多媒体信息压缩技术和同步技术。     

抽油机技术经济指标的模糊综合评价

针对我国抽油机评价过于笼统、模糊，缺乏全面性和综合性以及评价方法可操作性差的现状，提出了抽油机技术经济指标模糊综合评价方法。在确定抽油机评价指标的层次体系基础上，建立了抽油机技术经济指标模糊综合评价的数学模型，并以某厂CYJ10－3－53HB型抽油机为实例，对其运动和动力性能作了综合评价。这种模糊综合评价方法全面考虑各种性能指标以及它们对抽油机总体性能影响的不同程度，能得到较合理的评价结果，而且有较强的可操作性。     

三维定量储层地质模型与参数动态预测方法

提出了三维定量储层地质模型及其参数动态预测方法，用该方法可预测储层开采状态，水淹区及剩余油区分布和各剩余油区的可采储量，三维定量储层地质模型的预测图件可为合理开采提供依据。     

Use of helical parameters to generate candidate conformations for crystal packing: illustrative application to a polyimide

This communication describes the application and extension of a method for calculating the helical parameters with which to describe molecular conformations. The method, which was originally developed by Shimanouchi and others, is applied to a polyimide of 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and 2,2-dimethyl-1,3-(4-aminophenoxy)propane (DMDA) which has eight torsional bonds in the chemical repeat unit. Discrete low energy states for these torsions were determined by Ramanchandran energy maps of sequential dihedral pairs or single bond torsional energy diagrams. The total number of possible low energy conformations for these states is 1152 including conformationally related isoenantiomorphs. The method conveniently generates the conformations for subsequent crystal structure packing and refinement. Consideration of these together with the X-ray data of Cheng and co-workers reduces the number to about 15 with about a 2/1 conformation and a c axis of approximately 49.2 Å. Of these, about half appear to be good candidates for crystal packing.